Mini 2010 Clubman User Manual download pdf (Page 120)

Replacing components

118

3. Pull off the cable connector 1, unlock the

bulb holder, arrow 2, and remove it,

arrow 3.

4. Screw out the respective bulb counterclock-

wise.

5. To insert the new bulb and reinstall the tail

lamp, proceed in reverse order.

Rear fog lamp*

21 watt bulb, P 21 W

The rear fog lamp is located in the left tail

lamp, refer to Tail lamps page 117.<

License plate lamps

5 watt bulb, C 5 W

1. Using a screwdriver, push the lamp to the

left in the tab of the lamp housing, arrow 1.

2. Remove the lamp, arrow 2.

3. Replace the bulb.

4. Insert the lamp.

Center brake lamp

This lamp uses LED technology for operation. In

the event of a malfunction, contact your MINI

dealer or a workshop that has specially trained

personnel working in accordance with the spec-

ifications of your MINI manufacturer.

Repairing a flat tire

Safety measures in the event of a break-

down:

Park the vehicle as far as possible from moving

traffic and switch on the hazard warning flash-

ers.

Turn the steering wheel until the front wheels

are in the straight-ahead position and engage

the steering wheel lock. Engage the parking

brake and shift into 1st or reverse gear or place

the selector lever in position P.

All passengers should be outside the vehicle and

in a safe place, e.g. behind a guardrail.

Erect a warning triangle or warning flasher at the

appropriate distance if necessary. Comply with

all safety guidelines and regulations.<

In the event of a flat tire, different procedures

should be followed depending on the equip-

ment included in your vehicle:

> MINI Mobility System, refer to the following

section

> Run-flat tires, page 103

> Tire change with space-saver spare tire,

page 121

MINI Mobility System with onboard

vehicle tool kit and tire change set*

Preparations

Use of the MINI Mobility System may be ineffec-

tive if the tire puncture measures approx. 1/8 in/

4 mm or more. Contact the nearest MINI dealer

if the tire cannot be made drivable with the

Mobility System.

Do not remove foreign bodies which have pen-

etrated the tire if possible.

Follow the instructions on using the Mobil-

ity System found on the compressor and

the sealant bottle.<

Remove the adhesive label for the speed limit

from the sealant bottle and affix it to the steer-

ing wheel.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 159 160

Comments to this Manuals

No comments

Mini 2010 Clubman User Manual Page 120

Comments to this Manuals

Related products and manuals for Cars Mini 2010 Clubman